YOUR SOURCE OF HIGH QUALITY MOTORS
[ E-mail: sales@wondermotor.com ] [ Phone: 626.322.9220 ]
that are listed here but not on our ebay store site, simply e-mail us to request for your order(s). We also
welcome wholesale/resale buyers.
This is a compact 12vdc brushless motor that outputs 100W of power with a controller integrated to the
motor. 2 wires for the power lines and 3 thinner wires for connecting to a potentiometer. Motor has a
reverse polarity protection in case that an user accidentally wires the power lines incorrectly. When
reverse polarity occurs, a fuse will burn out and all the user has to do is to replace the fuse and the
motor is good as new. Motor is a Hall-sensor type. Specifications are listed below:
Motor's Diameter: 3.8 inches
Motor's Body Length: 2.5 inches
Shaft Diameter: 8mm with one flat surface (D shaft)
Shaft Length: 2 inches
Housing Construction: Die-cast aluminum
Mounting: Rear mount with 2-hole, 3-hole and 4-hole mounting patterns
Rated Voltage: 13.8 VDC
Rated Output: 100 Watts
Speed at Rated Output: 2700 RPM
No-load Speed: 4000 RPM
Speed Control Type: 3 wires for 10k ohm potentiometer, yellow to wiper, red to return, black to ground
Bearings: 2 ball bearings
Magnet Material: Rare-earth magnet (Neodymium)
Rotation: Clock-wise
Protections: Current limiter, reverse-polarity, load-dump
Wiring: Black to negative; red to positive
Manufacturer: S&S Tech
This is a compact 12vdc brushless motor that outputs 100W of power with a controller integrated to the
motor. 2 wires for the power lines and 3 thinner wires for connecting to a potentiometer. Motor has a
reverse polarity protection in case that an user accidentally wires the power lines incorrectly. When
reverse polarity occurs, a fuse will burn out and all the user has to do is to replace the fuse and the
motor is good as new. Motor is a Hall-sensor type. Specifications are listed below:
Motor's Diameter: 3.8 inches
Motor's Body Length: 2.5 inches
Shaft Diameter: 8mm with one flat surface (D shaft)
Shaft Length: 2 inches
Housing Construction: Die-cast aluminum
Mounting: Rear mount with 2-hole, 3-hole and 4-hole mounting patterns
Rated Voltage: 13.8 VDC
Rated Output: 100 Watts
Speed at Rated Output: 2700 RPM
No-load Speed: 4000 RPM
Speed Control Type: 3 wires for 10k ohm potentiometer, yellow to wiper, red to return, black to ground
Bearings: 2 ball bearings
Magnet Material: Rare-earth magnet (Neodymium)
Rotation: CCW
Protections: Current limiter, reverse-polarity, load-dump
Wiring: Black to negative; red to positive
Manufacturer: S&S Tech
This is a brand new BRUSHLESS DC electric gear motor that has extremely high torque to handle many
heavy-load applications.
The specifications are listed below:
Brushless Motor Controller: Built-in
Poentiometer: 10 k ohm with knob included
Rated Voltage: 12 VDC
Speed Range: 0-40 RPM (Variable Speed)
Rated Load: 25 Watts
Rated Torque: 6.0 N-m (4.4 ft-lb)
Mounting: M5 screw holes at gear box front (face mount)
Shaft: 8mm shaft with 1 flat (D shaft); Shaft is 29mm long
Reversing Wires: Connect the two (thin) wires and the motor will reverse its rotation
Manufacturer: S&S Tech
WARNING: Do NOT attempt to reverse rotation by reversing the polarity of the supply lines. Doing so
will permanently damage the motor controller!
This is a brand new BRUSHLESS DC electric gear motor that has extremely high torque to handle many
heavy-load applications.
The specifications are listed below:
Brushless Motor Controller: Built-in
Poentiometer: 10 k ohm with knob included
Rated Voltage: 24 VDC
Speed Range: 0-40 RPM (Variable Speed)
Rated Load: 25 Watts
Rated Torque: 6.0 N-m (4.4 ft-lb)
Mounting: M5 screw holes at gear box front (face mount)
Shaft: 8mm shaft with 1 flat (D shaft); Shaft is 29mm long
Reversing Wires: Connect the two (thin) wires and the motor will reverse its rotation
Manufacturer: S&S Tech
WARNING: Do NOT attempt to reverse rotation by reversing the polarity of the supply lines. Doing so
will permanently damage the motor controller!