worm gear motor 12v/24v
PN01007 Electric Gear Motor 12v Low Speed 50 RPM Gearmotor DC
Rated Voltage:  13.5 VDC
Rated Speed:  50 RPM
Rated Load:  60 Watts
Rated Torque:  11.5 N-m (8.5 ft-lb)
Mounting:  M6 screw holes
Shaft:  10mm shaft with 2 flats where flat to flat is 6.6mm and threaded end to fit a M6 tightening nut.
PN01107 Electric Gear Motor 24v Low Speed 50 RPM Gearmotor DC
Rated Voltage:  27 VDC
Rated Speed:  50 RPM
Rated Load:  60 Watts
Rated Torque:  11.5 N-m (8.5 ft-lb)
Mounting:  M6 screw holes
Shaft:  10mm shaft with 2 flats where flat to flat is 6.6mm and threaded end to fit a M6 tightening nut.
Ready to buy this item?
Please click [
HERE ]
PART NUMBER(S):  PN01007 (12VDC); PN01107 (24VDC)
PN00213 (12VDC + DPDT REVERSIBLE SWITCH)
PN00313 (24VDC + DPDT REVERSIBLE SWITCH)
WONDERMOTOR
YOUR SOURCE OF HIGH QUALITY MOTORS
[ E-mail:  sales@wondermotor.com ] [ Phone:  626.322.9220 ]
[ Discussion Home Page ]      |      [ Product Home Page ]
Our products are available to be purchased online.  Please simply click on the product(s) that you wish to
order below for more information.  For products that are listed here but not found in our online store, simply
e-mail or call us to request for your order(s).  We also welcome wholesale/resale buyers.  [ Privacy Policy ]
Click [ HERE ] to access your online Shopping Cart
PN00213 Electric Gear Motor 12v Low Speed 50 RPM Gearmotor DC + DPDT Reversible Switch

A reversible DPDT switch is included in this package.  All connectors are matched to connect to the
motor's wire leads so no crimping or wiring is required.  The switch's functions are, reverse, forward,
and center off.

Rated Voltage:  13.5 VDC
Rated Speed:  50 RPM
Rated Load:  60 Watts
Rated Torque:  11.5 N-m (8.5 ft-lb)
Mounting:  M6 screw holes
Shaft:  10mm shaft with 2 flats where flat to flat is 6.6mm and threaded end to fit a M6 tightening nut.
PN00313 Electric Gear Motor 24v Low Speed 50 RPM Gearmotor DC + DPDT Reversible Switch

A reversible DPDT switch is included in this package.  All connectors are matched to connect to the
motor's wire leads so no crimping or wiring is required.  The switch's functions are, reverse, forward,
and center off.

Rated Voltage:  27 VDC
Rated Speed:  50 RPM
Rated Load:  60 Watts
Rated Torque:  11.5 N-m (8.5 ft-lb)
Mounting:  M6 screw holes
Shaft:  10mm shaft with 2 flats where flat to flat is 6.6mm and threaded end to fit a M6 tightening nut.